01% THD
120 + 120 Tweeter
180 + 180 Woofer All-in-One (Bass+MID+Tweeter Function)
770 + 770 Sub Deep Bass
TOTAL: 1.070 + 1.070 ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (2.140) ~ 2.200 Watts RMS Professional (01% THD)
10% THD
0132 + 0132 Tweeter
0198 + 0198 Woofer All-in-One (Bass+MID+Tweeter Function)
0847 + 0847 Sub Deep Bass
TOTAL: 1.177 + 1.177 ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (2.354) ~ 2.400 Watts RMS Tolerance accepted in BRAZIL (10% THD)
20% THD
0144 + 0144 Tweeter
0216 + 0216 Woofer All-in-One (Bass+MID+Tweeter Function)
0924 + 0924 Sub Deep Bass
TOTAL: 1.284 + 1.284 ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (2.568) ~ 2.600 Watts RMS Maximum Tolerance Accepted IN SOME COUNTRIES (20% THD)
30% THD
0156 + 0156 Tweeter
0234 + 0234 Woofer All-in-One (Bass+MID+Tweeter Function)
1001 + 1001 Sub Deep Bass
TOTAL: 1.391 + 1.391 ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (2.782) ~ 2.800 Watts RMS Maximum Tolerance Accepted IN SOME COUNTRIES (30% THD)
40% THD (OFFICIAL INTERNATIONAL RELEASE)
0168 + 0168 Tweeter
0252 + 0252 Woofer All-in-One (Bass+MID+Tweeter Function)
1080 + 1080 Sub Deep Bass
TOTAL: 1.500 + 1.500 ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (2.996) ~ 3.000 Watts RMS Maximum Tolerance Accepted IN SOME COUNTRIES (40% THD)
(The more OHMS, the more Power will be supported by the items below, competitors LG, SAMSUNG, PANASONIC, PHILIPS, etc. use LESS OHMS in their most powerful Mini System's, which will lead to product and box burns in short time of use if compared to the new lines of SONY, SHAKE 33/44D, SHAKE 55/66D, SHAKE 77/88D and SHAKE 99/100D)
OHMS:
Tweeter - 04Ω [ohms]
Woofer All-in-One - 04Ω [ohms] (120 Hz ~ 10.000 Hz [10 kHz] Frequencies cut off on Main Unit / Power)
Sub Deep Bass - 10Ω [ohms] (40 ~ 600 Hz Frequencies cut off on Main Unit / Power)
Speakers Size:
Tweeter: 02,5 cm in diameter (1 inch [0.984252 inch]) per speaker unit
Woofer All-in-One: 20,0 cm in diameter (7 7/8 inches or 7.8~7.9 [7.87402 inches]) per speaker unitSub Deep Bass: 35 cm in diameter (14 inches [13.7795 inches]) per speaker unit
Reproducible supported frequency response
20 Hz - 20 kHz
Signal to Noise Ratio
More than 90 dB
Dynamic range (average noise)
More than 88 dB
Dimension and Weight of EACH ACOUSTIC BOX UNIT:
Dimensions (l / a / p) (Approx.):
490 mm × 660 mm × 363 mm (19 ⅜ inches × 26 inches × 14 inches)
Weight (approx.):
26,0 kg (57 lb 6 oz)
Quantity: 2 pieces
Dimension and Weight of Main Unit / Sound Power:
Dimensions (l / a / p) (Approx.):
505 mm × 160 mm × 350 mm (20 inches × 6 ⅜ inches × 13 ⅞ inches)
Weight (approx.):
7,6 kg (16 lb 13 oz)
Supplied Accessories:
Remote Control (1)
Batteries R6 (size AA) (2)
FM Cable Antenna / AM Frame (1)
Lower Panel (1)
MINIMUM ENERGY CONSUMPTION: at least 500 Watts/hour
MAXIMUM ENERGY CONSUMPTION: maximum 3000 Watts/hour (peak - when playing bass sounds at maximum volume).
!DANGER! May cause fire in electrical grids of Brazilian households that have less than 3 phases/less than 3 wires of Power in the Control Clock of Electrical Network.
120 V - 240 V AC, 50/60 Hz
Power Consumption (in Power Saving Mode)
0.5 W (When "BT STANDBY" is set to "STANDBY OFF")
4.0 W (When "BT STANDBY" is set to "STANDBY ON")
*PLEASE NOTE that the SONY SHAKE 33/44D, SONY SHAKE 55/66D, SONY SHAKE 77/88D and SONY SHAKE 99/100D use the same Tweeters, with the same power.
Therefore, what differs in the total power of these Mini System's is the Sound Pressure, because of the Sub Bass Bass Speakers that, the bigger and more powerful, offer a more powerful bass and greater sound pressure, being more efficient to be used in external area.
However, the volume measurement in decibels will be the same on all devices, considering the fact that they all use the same Tweeter (with the same power) and the SONY SHAKE 33/44D, SONY SHAKE 77/88D and SONY SHAKE 99/100D use the same Medium [Mid] Speaker (with the same power).
© 2014 SONY Corporation
