SONY SHAKE 33 (SONY SHAKE 44D in Asia):
01% THD
120 + 120 Tweeter
120 + 120 MID
546 + 546 Woofer Bass
TOTAL: 786 + 786 PER ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (1.572) ~ 1.600 Watts RMS Professional (01% THD)
PROFESSIONAL OFFICIAL SONY P.M.P.O.: (17,292) ~ 17,600 Watts P.M.P.O. @ 01% THD
10% THD
0132 + 0132 Tweeter
0132 + 0132 MID
0600 + 0600 Woofer Bass
TOTAL: 0864 + 0864 PER ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (1.728) ~ 1.800 Watts RMS Tolerance accepted in BRAZIL (10% THD)
OFFICIAL SONY P.M.P.O. IN BRAZIL: (19,008) ~ 19,800 Watts P.M.P.O. @ 10% THD
20% THD
0144 + 0144 Tweeter
0144 + 0144 MID
0655 + 0655 Woofer Bass
TOTAL: 0943 + 0943 PER ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (1.886) ~ 1.900 Watts RMS Maximum Tolerance Accepted IN SOME COUNTRIES (20% THD)
OFFICIAL SONY P.M.P.O. IN SOME COUNTRIES: (20,746) ~ 20,900 Watts P.M.P.O. @ 20% THD
30% THD
0156 + 0156 Tweeter
0156 + 0156 MID
0710 + 0710 Woofer Bass
TOTAL: 1.022 + 1.022 PER ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF (2.044) ~ 2.100 Watts RMS Maximum Tolerance Accepted IN SOME COUNTRIES (30% THD)
OFFICIAL SONY P.M.P.O. IN SOME COUNTRIES: (22,484) ~ 23,100 Watts P.M.P.O. @ 30% THD
40% THD (OFFICIAL INTERNATIONAL RELEASE)
0168 + 0168 Tweeter
0168 + 0168 MID
0764 + 0764 Woofer Bass
TOTAL: 1.100 + 1.100 PER ACOUSTIC BOX UNIT (PER SPEAKER UNIT) = TOTAL OF 2.200 Watts RMS Maximum Tolerance Accepted IN SOME COUNTRIES (40% THD)
OFFICIAL SONY P.M.P.O. IN SOME COUNTRIES: 24,200 Watts P.M.P.O. @ 40% THD
(The more OHMS, the more Power will be supported by the items below, competitors LG, SAMSUNG, PANASONIC, PHILIPS, etc. use LESS OHMS in their most powerful Mini System's, which will lead to product and box burns in short time of use if compared to the new lines of SONY, SHAKE 33/44D, SHAKE 55/66D, SHAKE 77/88D and SHAKE 99/100D)
OHMS:
Tweeter - 04Ω [ohms]
Mid - 04Ω [ohms]
Sub Deep Bass - 04Ω [ohms] (40~ 600 Hz Frequencies cut off on Main Unit / Power)
Speakers Size:
Tweeter: 02,5 cm in diameter (1 inch [0.984252 inch]) per speaker unit
MID: 10,0 cm in diameter (4 inches [3,93701 inches]) per speaker unit
Woofer Bass: 30 cm in diameter (12 inches [11.811 inches]) per speaker unit
Reproducible supported frequency response
20 Hz - 20 kHz
Signal to Noise Ratio
More than 90 dB
Dynamic range (average noise)
More than 88 dB
Dimension and Weight of EACH ACOUSTIC BOX UNIT:
Dimensions (l / a / p) (Approx.):
410 mm × 610 mm × 376 mm (16 ¼ inches × 24 ⅛ inches × 14 ⅞ inches)
Weight (approx.):
18,5 kg (40 lb 13 oz)
Quantity: 2 pieces
Dimension and Weight of Main Unit / Sound Power:
Dimensions (l / a / p) (Approx.):
505 mm × 160 mm × 350 mm (20 inches × 6 ⅜ inches × 13 ⅞ inches)
Weight (approx.):
7,0 kg (15 lb 7 oz)
Remote Control (1)
Batteries R6 (size AA) (2)
FM Cable Antenna / AM Frame (1)
Lower Panel (1)
MINIMUM ENERGY CONSUMPTION: at least 350 Watts/hour
MAXIMUM ENERGY CONSUMPTION: maximum 2200 Watts/hour (peak - when playing bass sounds at maximum volume).
!DANGER! May cause fire in electrical grids of Brazilian households that have less than 3 phases/less than 3 wires of Power in the Control Clock of Electrical Network.
120 V - 240 V AC, 50/60 Hz
Power Consumption (in Power Saving Mode)
0.5 W (When "BT STANDBY" is set to "STANDBY OFF")
4.0 W (When "BT STANDBY" is set to "STANDBY ON")
*PLEASE NOTE that the SONY SHAKE 33/44D, SONY SHAKE 55/66D, SONY SHAKE 77/88D and SONY SHAKE 99/100D use the same Tweeters, with the same power.
Therefore, what differs in the total power of these Mini System's is the Sound Pressure, because of the Sub Bass Bass Speakers that, the bigger and more powerful, offer a more powerful bass and greater sound pressure, being more efficient to be used in external area.
However, the volume measurement in decibels will be the same on all devices, considering the fact that they all use the same Tweeter (with the same power) and the SONY SHAKE 33/44D, SONY SHAKE 77/88D and SONY SHAKE 99/100D use the same Medium [Mid] Speaker (with the same power).
© 2014 SONY Corporation
